King sized continued....

If you have the desire to build things for your home you must invest in a nail gun and air compressor.  In this day of carpel tunnel and joint issues you might save yourself alot of pain and physical therapy charges.   I have gone through 2 - 18 gauge guns in my building lifetime (17 years ). My latest and favorite are these made by Porter Cable.  I got a great deal from Overstock.com on a Refurbished set.  The set had a 16 & 18 gauge nailers and a stapler.  I worked with a 18 gauge for years.  The 16 is the best for the actual building and the 18 is good for the final more delicate trim & etc.  This would be a good one......

Well, let finish up this project!  The above tongue and groove wood is what I came up with as ingredients. I wanted to use it because it would give interest in texture and pattern.  it's kinda special.  The bead board stuff came out of a family home that was de-constructed.  I've used it for a wall, and wainscotting.  This is the last of it. Although I don't have enough of either to just use one kind so I came up with this pattern. You could use any wood.  Mix it up.  Use wood that already has paint and make it colorful. Clear coat it with something.  I almost did that myself, but I didn't have time to "dilly dally".  It's freezing out and its time to get a headboard!  
It's easier to show you the photo of the tongue and groove wood laid out and then I can explain your best route of completion. I started by cutting the right and left sides with a random 1x4 that I had.  Cut to be flush with the top and bottom.  Glue and Nail ONE end only.  Then cut a board for the top edge.  When you get those 2 established (nailed) then you have a solid edge to butt up to get the decorative parts settled.  I needed to stretch out my tongue and groove boards so I created "spacers" with leftovers from the top and bottom boards.  I bought cheap pine 1x3's.....the rougher less pretty stuff from Lowe's.  The spacers then now are my template for "height" for the rest of the vertical boards.  Once you get your boards all cut - test them out.  I was in a hurry and didn't change my nail gun.  So I had some go through, but I figured the back side of the HB won't over be exposed so I just clipped them off.  Not always a good option.
You'll see in this close-up photo the small nail hole and some gaps that occurred.  All this type of thing can be filled with nail fill. ( Keep an eye out for an upcoming blog for "Hints and Tips" that I've learned and types of things I use. )

Get your ingredients all laid out before nailing.  This is spoken from experience.  I put the bottom on last to make sure all are forced up.  What I figured was that if there are any flaws I wanted them hidden behind pillows......so if you have a short board, make it short on the bottom side. 

Lastly I added the top ledge.  Below is a photo from above. From left to right : trim, plywood backing and then the top of the 2x4 leg.  All the boards are flush (even) on the top it was easy to cut a 1x4 to top it all off.  I added 1' hangover to each end.

top view showing layers of wood

Gluing that top board is important.

primer coat on the finished headboard

Most likely it will be lifted by that board so it needs to be strong!  Fill your holes and cracks.  I had one piece of bead board I put a line of caulk between as the gap was a little bigger and obvious.  I often will put one coat of paint on my creation before filling holes because you can see what fills up with paint and what can be ignored. Tomorrow's the final painting day.  I'll show you the results then.

Reuse Recycle.....be creative with what you have.

This is a hall tree I made 3 years ago.  It was one of the last doors I had salvaged.....Now people have figured out that they are amazing sources of wood and I have to buy them....



















We went to the beach this summer and parked on a residential street around the corner from Mo's restaurant and found this.  First of all - I LOVE METAL! I even have a Pinterest board with fun metal reuse ideas.  I am big into reusing things for a new creation.  If you can't see...this is a fountain! ( I should of taken a video...dang it ) Super cool!  They also had a great fence made of this metal siding/roofing (seen on either side of the fountain.  I love it that people are getting original I'm so tired of houses painted taupe and looking all exactly the same.

This is a great fence.....Totally original.
Be original.....don't be taupe.

little tiny houses

Add caption

rough cut lumber boxes with hand made metal handles

My Bird house windows are my favorite.  I always sell out at the summer shows.  Each one is different and well thought out.  Switching the hardware and arrangement until it's "just so"....I can't calculate an hourly total to figure the cost. They are labor intensive, but the joy i get in creating them is well worth it.  This summer when I return as "laura's salvage design" and as a vendor to the Cracked Pots  Community hopefully I will be remembered.  I suppose it was foolish of me to walk away.  I had customers looking for me in my "regular" spot....oh well, there will be others.  Also pictured here are my rough cut boxes.  The hubby creates the handles in the shop and I pull the square nails out of the gorgeous 1x12's.  We salvaged the boards from the deconstruction of Aunt Alice's house.  They were a vertical as part of the exterior wall.  I saved as many as I could.  Even the cracked and broken ones.  I cut slats for the bottoms (usually out of cedar scraps) and coat them with clear acrylic.  They are gorgeous for plants and garden tools outside or mail, towels or firewood indoors.  The rough cut marks are sanded a bit but still beautiful.  Lot of history and very multipurpose.